Files
typewriter/firmware/sdkconfig.defaults
Julien Calixte beb11eda5e chore(firmware): skip legacy-I2C conflict check
esp-idf-hal always compiles its i2c.rs, which binds the old driver/i2c.h
API, so ESP-IDF links the legacy driver's constructor into every image and
prints its deprecation warning at boot. Typoena uses no I2C (EPD/SD are SPI,
keyboard is USB), so the warning is pure noise; this flag compiles the
constructor (and its conflict-abort check) out.
2026-07-12 12:23:10 +02:00

62 lines
3.5 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Rust often needs a bit of an extra main task stack size compared to C (the default is 3K)
# You might have to increase this further if you allocate large stack variables in the main task.
# Bumped for the TLS handshake (Spike 6): mbedtls runs on the calling task and
# wants several KB of stack on top of the app's own usage. 12 KB ran the editor
# AND a full TLS-on-main handshake on hardware — the last-known-good value for
# this shared stack.
#
# Spike 7 briefly bumped this to 96 KB because libgit2's push chain is far deeper
# (~67 KB measured for a trivial config write: nearly every function puts a 4 KB
# `char path[GIT_PATH_MAX]` on the stack and init→config→FATFS→wear-leveling
# nests ~10 deep). But this sdkconfig is SHARED with the editor build, so that
# forced the editor to over-reserve ~80 KB for nothing. Git now runs on its own
# large-stack thread instead (git_push.rs — GIT_STACK via
# std::thread::Builder::stack_size), so this drops back to the Spike-6 value.
# (The "time() only works on the main task" theory was a misdiagnosis: that
# iteration ran git on a std::thread with the DEFAULT 4 KB stack and just
# overflowed sooner — it was always stack depth, never thread-vs-main.)
CONFIG_ESP_MAIN_TASK_STACK_SIZE=12288
# Increase a bit these stack sizes as they are also a bit too small by default
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4096
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=4096
# You might have to increase this further if you spawn your own Rust threads
# that allocate large stack variables; or better yet - use
# `std::thread::Builder::new().stack_size(XXX)` for spawning
CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=4096
# FatFS long filenames (Spike 3 — SD). Default is 8.3-only, which rejects the
# persistence module's atomic-save temp name (`notes.md.tmp` has two dots).
# LFN on the heap keeps the working buffer off the (small) task stack.
CONFIG_FATFS_LFN_HEAP=y
# PSRAM (Spike 7 — the git working set needs it; the docs memory plan budgets
# ~1.5 MB PSRAM for pack/delta work, and the rope buffer lives there too). This
# board is an ESP32-S3-WROOM-1-N16R8 → 8 MB *octal* PSRAM, so OCT mode is
# required (quad would fail to init). USE_MALLOC adds PSRAM to the heap
# allocator, so large allocations (Box, Rope, libgit2 buffers) land there
# instead of the ~339 KB internal DRAM Spike 6 measured. Octal PSRAM occupies
# GPIO 3337; the EPD/SD pins (413) deliberately avoid that range, so no wiring
# conflict. Speed left at the 40 MHz default (safe first-enable; 80 MHz needs
# matching flash-freq config and is a later tuning step).
CONFIG_SPIRAM=y
CONFIG_SPIRAM_MODE_OCT=y
CONFIG_SPIRAM_USE_MALLOC=y
# Silence the legacy-I2C boot warning. esp-idf-hal's i2c.rs is always compiled
# and binds the old `driver/i2c.h` API, so the legacy driver's TU (and its
# `__attribute__((constructor))` deprecation warning) gets linked into every
# image — even though Typoena uses no I2C at all (EPD/SD are SPI, keyboard is
# USB). This flag wraps that constructor out. Safe here: we link neither the
# new i2c_master driver nor call the old one, so the conflict-abort check it
# also removes can never fire.
CONFIG_I2C_SKIP_LEGACY_CONFLICT_CHECK=y
# TLS trust store (Spike 6 — Wi-Fi + TLS, the gate for Spike 7 git push).
# The certificate bundle backs esp_crt_bundle_attach so an HTTPS GET to
# api.github.com validates against real roots. FULL rather than the common
# subset so a less common CA in the chain can't surprise us on the bench.
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y