02b7ed88b6
The device's libgit2 has no SSH transport (HTTPS+PAT over mbedTLS only), but _load-repo copied the desktop clone's origin verbatim — an SSH-shaped URL fails every on-device push/fetch with "unsupported URL protocol" (first real-repo :sync, 2026-07-13). Derive the HTTPS equivalent for the card copy (git@host:path and ssh://git@host/path); the source clone keeps its own URL. Warns on non-github hosts, since the embedded trust store carries GitHub roots only.
545 lines
26 KiB
Makefile
545 lines
26 KiB
Makefile
# Typoena firmware — common commands.
|
||
# Recipes source ~/export-esp.sh themselves (LIBCLANG_PATH + Xtensa GCC),
|
||
# so no per-shell setup is needed before calling just.
|
||
|
||
# Load firmware/.env (Wi-Fi creds for the network spikes) into recipe env.
|
||
# Absent .env is fine — the editor build ignores TW_* entirely.
|
||
set dotenv-load := true
|
||
|
||
esp_env := ". ~/export-esp.sh &&"
|
||
elf := "target/xtensa-esp32s3-espidf/release/firmware"
|
||
elf_wifi := "target/xtensa-esp32s3-espidf/release/wifi_tls"
|
||
elf_sd := "target/xtensa-esp32s3-espidf/release/sd_fat"
|
||
elf_splash := "target/xtensa-esp32s3-espidf/release/splash"
|
||
elf_git := "target/xtensa-esp32s3-espidf/release/git_smoke"
|
||
elf_git_push := "target/xtensa-esp32s3-espidf/release/git_push"
|
||
elf_git_sync := "target/xtensa-esp32s3-espidf/release/git_sync"
|
||
|
||
# Custom partition table (adds the `storage` FAT partition for the git working
|
||
# copy). Only the git-push flash applies it — the editor flash keeps the default
|
||
# single-app layout, so this change is scoped to Spike 7's finish.
|
||
partition_table := justfile_directory() + "/partitions.csv"
|
||
|
||
# Spike 7 Path 2 — env for the git2/libgit2 build. LIBGIT2_SRC points at the
|
||
# vendored libgit2 submodule (v1.9.4, matches libgit2-sys 0.18.5). pkgconfig/
|
||
# holds fake .pc files so libgit2-sys + libz-sys run in system mode and the
|
||
# symbols come from the esp-idf libgit2 component. Only the git recipes set this,
|
||
# so the editor build never compiles libgit2.
|
||
libgit2_src := justfile_directory() + "/components/libgit2/vendor"
|
||
git_env := "LIBGIT2_SRC=" + libgit2_src + " LIBGIT2_NO_VENDOR=1 PKG_CONFIG_ALLOW_CROSS=1 PKG_CONFIG_LIBDIR=" + justfile_directory() + "/pkgconfig"
|
||
|
||
# list recipes
|
||
default:
|
||
@just --list
|
||
|
||
# compile (release) — the nominal product build: full firmware WITH git
|
||
# publishing (compiles libgit2 + mbedTLS, links git2). For fast iteration on the
|
||
# editor / EPD / USB / SD without paying for libgit2, use `build-light`.
|
||
build:
|
||
{{esp_env}} {{git_env}} cargo build --release --bin firmware --features git
|
||
|
||
# build + flash + open serial monitor (full firmware, see `build`)
|
||
flash:
|
||
{{esp_env}} {{git_env}} cargo run --release --bin firmware --features git
|
||
|
||
# LIGHT editor build — no git: no libgit2 component (LIBGIT2_SRC unset) and no
|
||
# git2 crate (`git` feature off), so it builds much faster. `:sync` saves locally
|
||
# and skips the push. Use for anything but exercising publish.
|
||
build-light:
|
||
{{esp_env}} cargo build --release --bin firmware
|
||
|
||
# light build + flash + open serial monitor (see `build-light`)
|
||
flash-light:
|
||
{{esp_env}} cargo run --release --bin firmware
|
||
|
||
# serial monitor only, with decoded backtraces
|
||
monitor:
|
||
espflash monitor --elf {{elf}}
|
||
|
||
# Spike 6 — build the Wi-Fi + TLS spike (needs TW_WIFI_SSID / TW_WIFI_PASS in .env)
|
||
build-wifi:
|
||
{{esp_env}} cargo build --release --bin wifi_tls
|
||
|
||
# Spike 6 — flash + monitor the Wi-Fi + TLS spike
|
||
flash-wifi:
|
||
{{esp_env}} cargo run --release --bin wifi_tls
|
||
|
||
# serial monitor for the Wi-Fi spike, with decoded backtraces
|
||
monitor-wifi:
|
||
espflash monitor --elf {{elf_wifi}}
|
||
|
||
# Spike 3 — build the SD/FAT spike (no .env needed)
|
||
build-sd:
|
||
{{esp_env}} cargo build --release --bin sd_fat
|
||
|
||
# Spike 3 — flash + monitor the SD/FAT spike
|
||
flash-sd:
|
||
{{esp_env}} cargo run --release --bin sd_fat
|
||
|
||
# serial monitor for the SD spike, with decoded backtraces
|
||
monitor-sd:
|
||
espflash monitor --elf {{elf_sd}}
|
||
|
||
# SD primitive-op micro-benchmark — attributes the ~700 ms/loose-object write
|
||
# floor (docs/tradeoff-curves/sync-commit-staging.md). Writes only to /sd/sdbench.
|
||
build-bench:
|
||
{{esp_env}} cargo build --release --bin sd_bench
|
||
|
||
# build + flash + monitor the SD bench
|
||
flash-bench:
|
||
{{esp_env}} cargo run --release --bin sd_bench
|
||
|
||
# serial monitor for the SD bench, with decoded backtraces
|
||
monitor-bench:
|
||
espflash monitor --elf target/xtensa-esp32s3-espidf/release/sd_bench
|
||
|
||
# git-level micro-benchmark — localizes the ~700 ms/object libgit2 overhead
|
||
# (docs/tradeoff-curves/sync-commit-staging.md). Read-mostly on /sd/repo.
|
||
build-gitbench:
|
||
{{esp_env}} {{git_env}} cargo build --release --bin git_bench --features git
|
||
|
||
# build + flash + monitor the git-level bench
|
||
flash-gitbench:
|
||
{{esp_env}} {{git_env}} cargo run --release --bin git_bench --features git
|
||
|
||
# serial monitor for the git-level bench, with decoded backtraces
|
||
monitor-gitbench:
|
||
espflash monitor --elf target/xtensa-esp32s3-espidf/release/git_bench
|
||
|
||
# Spike 9 — build the boot splash spike (no .env needed)
|
||
build-splash:
|
||
{{esp_env}} cargo build --release --bin splash
|
||
|
||
# Spike 9 — flash + monitor the boot splash spike
|
||
flash-splash:
|
||
{{esp_env}} cargo run --release --bin splash
|
||
|
||
# serial monitor for the splash spike, with decoded backtraces
|
||
monitor-splash:
|
||
espflash monitor --elf {{elf_splash}}
|
||
|
||
# Spike 7 Path 2 — build the git2/libgit2 smoke (git2 safe API on device)
|
||
build-git:
|
||
{{esp_env}} {{git_env}} cargo build --release --bin git_smoke --features git
|
||
|
||
# Spike 7 Path 2 — flash + monitor the git2/libgit2 smoke
|
||
flash-git:
|
||
{{esp_env}} {{git_env}} cargo run --release --bin git_smoke --features git
|
||
|
||
# serial monitor for the git smoke, with decoded backtraces
|
||
monitor-git:
|
||
espflash monitor --elf {{elf_git}}
|
||
|
||
# Spike 7 finish — build the on-device git push (Wi-Fi + SNTP + flash-FAT + libgit2)
|
||
build-git-push:
|
||
{{esp_env}} {{git_env}} cargo build --release --bin git_push --features git
|
||
|
||
# Spike 7 finish — flash + monitor. espflash applies the custom partition table
|
||
# (so the `storage` FAT partition exists) and sets 16 MB flash. Uses espflash
|
||
# directly, not `cargo run`, so the table is applied only to this binary.
|
||
flash-git-push: build-git-push
|
||
espflash flash --monitor --baud 921600 --partition-table {{partition_table}} --flash-size 16mb {{elf_git_push}}
|
||
|
||
# serial monitor for the git push, with decoded backtraces
|
||
monitor-git-push:
|
||
espflash monitor --elf {{elf_git_push}}
|
||
|
||
# Milestone #2A — build the persistent-clone publish cycle (clone + fast-forward push)
|
||
build-git-sync:
|
||
{{esp_env}} {{git_env}} cargo build --release --bin git_sync --features git
|
||
|
||
# Milestone #2A — flash + monitor. Applies the same custom partition table as
|
||
# git-push (the `storage` FAT partition holds the persistent clone).
|
||
flash-git-sync: build-git-sync
|
||
espflash flash --monitor --baud 921600 --partition-table {{partition_table}} --flash-size 16mb {{elf_git_sync}}
|
||
|
||
# serial monitor for the git sync, with decoded backtraces
|
||
monitor-git-sync:
|
||
espflash monitor --elf {{elf_git_sync}}
|
||
|
||
# detect board, print chip/MAC/flash size
|
||
info:
|
||
espflash board-info
|
||
|
||
# list USB serial devices
|
||
ports:
|
||
@ls /dev/cu.usb* 2>/dev/null || echo "no USB serial device found"
|
||
|
||
# ─── SD card provisioning ────────────────────────────────────────────────────
|
||
# Prepare an SD card on a computer so it can go straight into Typoena (the
|
||
# decision in docs/notes/git-sync-images-and-repo-size.md): the device never
|
||
# cold-clones 566 MB over Wi-Fi + mbedTLS; a laptop copies the clone onto the
|
||
# card via a reader, and the device only ever takes the `open` + fast-forward
|
||
# path. Three entry points, each ejecting the card when done:
|
||
#
|
||
# just init ~/code/notes # full prep of a fresh card: repo + config
|
||
# just load ~/code/notes # (re)copy just the notes repo → /sd/repo
|
||
# just provision # (re)write just the config (derive + prompt)
|
||
#
|
||
# Config (Wi-Fi + PAT + git identity) needs no firmware/.env: each value is
|
||
# resolved from firmware/.env if present, else derived from tools the machine
|
||
# already has (git config, gh, the active Wi-Fi network + its Keychain
|
||
# password), else asked for at an interactive prompt with the derived value as
|
||
# the default. The PAT is always typed by hand — never derived (a broad
|
||
# `gh auth token` on a plaintext card would defeat the scoped-token model).
|
||
#
|
||
# Add a /Volumes/<name> as the last arg if more than one card is mounted.
|
||
# The `_`-prefixed recipes are shared internals (hidden from `just --list`).
|
||
sd_repo_dir := "repo"
|
||
|
||
# Full prep of a fresh card: copy the notes repo, seed the git-tracked config
|
||
# files (first-time only), write the runtime config, then eject. Run this once
|
||
# per card. <repo-src> is a clone made on this computer.
|
||
init repo_src sd_volume="":
|
||
#!/usr/bin/env bash
|
||
set -euo pipefail
|
||
vol="$(just _card "{{sd_volume}}" | tail -n1)"
|
||
just _load-repo "{{repo_src}}" "$vol"
|
||
just _seed-configs "$vol"
|
||
just _write-conf "$vol" "{{repo_src}}"
|
||
just _eject "$vol"
|
||
|
||
# (Re)copy just the notes repo to /sd/repo: fast-forward the source clone from
|
||
# its remote first, then rsync it across (full clone, gitignored paths excluded)
|
||
# and eject — e.g. to refresh the card after the device pushed new notes.
|
||
load repo_src sd_volume="":
|
||
#!/usr/bin/env bash
|
||
set -euo pipefail
|
||
vol="$(just _card "{{sd_volume}}" | tail -n1)"
|
||
just _load-repo "{{repo_src}}" "$vol"
|
||
just _eject "$vol"
|
||
|
||
# (Re)write just the config (Wi-Fi + PAT + git identity), then eject — e.g. to
|
||
# rotate the PAT or switch networks without touching repo/. Values are derived +
|
||
# prompted (see the section header); firmware/.env is an optional override. With
|
||
# no repo arg, the git remote is derived from the card's existing clone.
|
||
provision sd_volume="":
|
||
#!/usr/bin/env bash
|
||
set -euo pipefail
|
||
vol="$(just _card "{{sd_volume}}" | tail -n1)"
|
||
just _write-conf "$vol"
|
||
just _eject "$vol"
|
||
|
||
# Resolve the target card volume. Prints the /Volumes/<name> path as the last
|
||
# stdout line (callers capture it); all diagnostics go to stderr. Prefers an
|
||
# explicit name; else auto-detects exactly one removable/SD volume (covers cards
|
||
# in a built-in Mac reader, which report an "Internal" bus), and refuses on 0 or
|
||
# >1 — a wrong guess here means rsync --delete wipes the wrong disk's repo/.
|
||
_card sd_volume="":
|
||
#!/usr/bin/env bash
|
||
set -euo pipefail
|
||
want="{{sd_volume}}"
|
||
if [ -n "$want" ]; then
|
||
vol="/Volumes/$want"
|
||
[ -d "$vol" ] || { echo "error: '$vol' is not mounted" >&2; exit 1; }
|
||
else
|
||
cands=()
|
||
for v in /Volumes/*; do
|
||
[ -d "$v" ] || continue
|
||
info="$(diskutil info "$v" 2>/dev/null || true)"
|
||
# Treat a volume as a candidate card if ANY removable/SD signal is
|
||
# present. A card in a Mac's *built-in* reader shows Protocol "Secure
|
||
# Digital" + Removable Media "Removable", but sits on the "Internal"
|
||
# bus with no whole-disk "Ejectable" line — so the old
|
||
# "Ejectable: Yes AND external" test missed it entirely. None of these
|
||
# match the fixed internal APFS disk; a spurious extra match just
|
||
# trips the ">1 — name one" refusal below, which is safe.
|
||
if echo "$info" | grep -qiE 'Protocol:[[:space:]]+Secure Digital' \
|
||
|| echo "$info" | grep -qiE 'Removable Media:[[:space:]]+(Removable|Yes)' \
|
||
|| echo "$info" | grep -qiE 'Ejectable:[[:space:]]+Yes' \
|
||
|| echo "$info" | grep -qiE 'Device Location:[[:space:]]+External'; then
|
||
cands+=("$v")
|
||
fi
|
||
done
|
||
case "${#cands[@]}" in
|
||
0) echo "error: no removable card detected under /Volumes — insert an SD card (FAT32)" >&2; exit 1 ;;
|
||
1) vol="${cands[0]}" ;;
|
||
*) echo "error: multiple removable volumes — name one as the volume arg:" >&2
|
||
printf ' %s\n' "${cands[@]#/Volumes/}" >&2; exit 1 ;;
|
||
esac
|
||
fi
|
||
# The device won't mount a non-FAT card (esp_vfs_fat, format_if_mount_failed=false).
|
||
fs="$(diskutil info "$vol" 2>/dev/null | grep -iE 'File System Personality' | sed 's/.*:[[:space:]]*//' || true)"
|
||
case "$fs" in
|
||
*FAT32*|*MS-DOS*) : ;;
|
||
*) echo "warning: '$vol' is '$fs', not FAT32 — the device may fail to mount it" >&2 ;;
|
||
esac
|
||
echo "$vol"
|
||
|
||
# Copy a full clone of the notes repo to <vol>/repo. Everything the repo's
|
||
# .gitignore ignores is excluded (node_modules is 3.9 GB, gitignored, never in
|
||
# .git) — the device needs .git + the checkout (~720 MB), not the JS deps or
|
||
# secrets like firmware/.env. Copying (not a fresh `git clone` of the local
|
||
# path) preserves origin → GitHub so on-device fetch/push still work — except
|
||
# the URL scheme: the card copy's origin is rewritten to HTTPS at the end,
|
||
# because the device's libgit2 has no SSH transport (HTTPS+PAT over mbedTLS
|
||
# only). The source clone is never touched.
|
||
_load-repo repo_src vol:
|
||
#!/usr/bin/env bash
|
||
set -euo pipefail
|
||
src="{{repo_src}}"; src="${src%/}" # strip trailing slash
|
||
[ -d "$src/.git" ] || { echo "error: '$src' is not a git repo (no .git/)"; exit 1; }
|
||
|
||
origin="$(git -C "$src" remote get-url origin 2>/dev/null || true)"
|
||
case "$origin" in
|
||
https://*|git@*|ssh://*|git://*) echo "source origin: $origin" ;;
|
||
"") echo "warning: '$src' has no 'origin' remote — the device can't fetch/push after loading" ;;
|
||
*) echo "warning: origin is '$origin' (looks like a local path, not a remote) —"
|
||
echo " the device fetch/push will fail; set origin to the GitHub URL first" ;;
|
||
esac
|
||
if [ -n "${TW_REMOTE_URL:-}" ] && [ -n "$origin" ] && [ "$origin" != "${TW_REMOTE_URL}" ]; then
|
||
echo "warning: origin ($origin) != TW_REMOTE_URL (${TW_REMOTE_URL})"
|
||
fi
|
||
|
||
# Refresh the source clone from its remote before mirroring, so the card
|
||
# carries the latest — e.g. notes the device pushed since the last load.
|
||
# Fast-forward-only and best-effort: a dirty tree, diverged history, detached
|
||
# HEAD, or being offline just warns and copies the current on-disk state
|
||
# rather than aborting the card prep. Set TW_NO_PULL=1 to skip the pull.
|
||
case "$origin" in
|
||
https://*|git@*|ssh://*|git://*)
|
||
if [ -n "${TW_NO_PULL:-}" ]; then
|
||
echo "TW_NO_PULL set — skipping pull, copying current on-disk state"
|
||
else
|
||
branch="$(git -C "$src" symbolic-ref --quiet --short HEAD || true)"
|
||
if [ -z "$branch" ]; then
|
||
echo "warning: '$src' is in detached HEAD — skipping pull, copying current state" >&2
|
||
elif git -C "$src" pull --ff-only origin "$branch"; then
|
||
:
|
||
else
|
||
echo "warning: 'git pull --ff-only origin $branch' failed (dirty, diverged, or offline) —" >&2
|
||
echo " copying the current on-disk state instead" >&2
|
||
fi
|
||
fi
|
||
;;
|
||
esac
|
||
|
||
dest="{{vol}}/{{sd_repo_dir}}"
|
||
echo "copying repo: $src -> $dest"
|
||
mkdir -p "$dest"
|
||
|
||
# Build the exclude list from git's own ignore resolution (.gitignore +
|
||
# .git/info/exclude + global). --directory collapses a fully-ignored dir
|
||
# (node_modules/, 3.9 GB) to one line. Driving off git — not rsync's own
|
||
# dir-merge — means we never list a tracked file or anything under .git/, so
|
||
# a .gitignore pattern like `logs/` or `*.pack` can't corrupt the clone.
|
||
ignore_list="$(mktemp)"
|
||
trap 'rm -f "$ignore_list"' EXIT
|
||
git -C "$src" -c core.quotePath=false ls-files \
|
||
--others --ignored --exclude-standard --directory --no-empty-directory \
|
||
> "$ignore_list"
|
||
echo "excluding $(wc -l < "$ignore_list" | tr -d ' ') gitignored path(s) (incl. node_modules, .env)"
|
||
|
||
# -rt (no perms/owner/symlinks — meaningless on FAT), --modify-window=1 for
|
||
# FAT's 2 s timestamp granularity, --delete to mirror (re-runs stay clean),
|
||
# -P for progress on the ~700 MB copy. Scoped to repo/, never the card root.
|
||
rsync -rtP --delete --modify-window=1 --exclude-from="$ignore_list" "$src/" "$dest/"
|
||
|
||
# The device's libgit2 speaks HTTPS+PAT only (mbedTLS — no SSH transport),
|
||
# so an SSH origin copied verbatim fails every on-device push/fetch with
|
||
# "unsupported URL protocol" (found the hard way, 2026-07-13). Rewrite the
|
||
# CARD copy's origin to the HTTPS equivalent; the source clone keeps its
|
||
# own URL. Its embedded trust store carries GitHub's roots, hence the
|
||
# non-github warning.
|
||
case "$origin" in
|
||
git@*:*)
|
||
host="${origin#git@}"; host="${host%%:*}"
|
||
card_origin="https://$host/${origin#git@*:}"
|
||
;;
|
||
ssh://git@*)
|
||
rest="${origin#ssh://git@}"
|
||
card_origin="https://${rest%%[:/]*}/${rest#*/}"
|
||
;;
|
||
https://*) card_origin="$origin" ;;
|
||
*) card_origin="" ;;
|
||
esac
|
||
if [ -n "$card_origin" ]; then
|
||
if [ "$card_origin" != "$origin" ]; then
|
||
echo "rewriting card origin for the device: $origin -> $card_origin"
|
||
fi
|
||
git -C "$dest" remote set-url origin "$card_origin"
|
||
case "$card_origin" in
|
||
https://github.com/*) ;;
|
||
*) echo "warning: origin host isn't github.com — the device's embedded trust store" \
|
||
"only carries GitHub roots, so on-device TLS will fail without its CA" ;;
|
||
esac
|
||
elif [ -n "$origin" ]; then
|
||
echo "warning: origin '$origin' has no HTTPS equivalent I can derive —"
|
||
echo " on-device push/fetch will fail; set it by hand:"
|
||
echo " git -C '$dest' remote set-url origin https://github.com/<owner>/<repo>.git"
|
||
fi
|
||
|
||
# First-time setup: seed the two git-tracked config files into the card's repo/
|
||
# so they commit + sync on the device's first `:sync`. Writes ONLY a file that is
|
||
# absent — a card whose clone already carries `.typoena.toml` /
|
||
# `.typoena.snippets.json` keeps its own, so a re-`init` never clobbers a synced
|
||
# library. The starter `.typoena.toml` mirrors the editor defaults; the snippet
|
||
# library is assembled from the curated catalog (snippets-catalog/, opt-in per
|
||
# group) with `jq`. Non-interactive runs take every default (all groups).
|
||
_seed-configs vol:
|
||
#!/usr/bin/env bash
|
||
set -euo pipefail
|
||
repo="{{vol}}/{{sd_repo_dir}}"
|
||
catalog="{{justfile_directory()}}/snippets-catalog"
|
||
interactive=1; [ -t 0 ] || interactive=0
|
||
|
||
# ask_yn "label" → 0 (yes) / 1 (no); default yes, non-interactive → yes.
|
||
ask_yn() {
|
||
local ans
|
||
if [ "$interactive" = 0 ]; then return 0; fi
|
||
read -r -p " $1 [Y/n]: " ans || ans=""
|
||
[[ "${ans:-Y}" =~ ^[Yy] ]]
|
||
}
|
||
|
||
# ── starter prefs (.typoena.toml) ────────────────────────────────────────
|
||
prefs="$repo/.typoena.toml"
|
||
if [ -e "$prefs" ]; then
|
||
echo "keeping existing .typoena.toml"
|
||
elif ask_yn "seed a starter .typoena.toml (editor defaults)?"; then
|
||
# printf per line (matching _write-conf), so no heredoc indentation trap.
|
||
{
|
||
printf '# Typoena editor preferences — hand-editable, git-tracked.\n'
|
||
printf '# Edit here, or change live from the Cmd-P palette (type `>`).\n'
|
||
printf 'save_on_idle = true\n'
|
||
printf 'format_on_save = true\n'
|
||
printf 'line_numbers = true\n'
|
||
printf 'theme = "light"\n'
|
||
printf 'auto_sync = "10m"\n'
|
||
} > "$prefs"
|
||
echo "wrote .typoena.toml"
|
||
fi
|
||
|
||
# ── snippet library (.typoena.snippets.json) from the catalog ────────────
|
||
snips="$repo/.typoena.snippets.json"
|
||
if [ -e "$snips" ]; then
|
||
echo "keeping existing .typoena.snippets.json"
|
||
elif ! command -v jq >/dev/null 2>&1; then
|
||
echo "warning: jq not found — skipping the snippet catalog (install jq, or" >&2
|
||
echo " hand-write $snips later)" >&2
|
||
else
|
||
echo "snippet catalog — choose groups to include:" >&2
|
||
picked=()
|
||
ask_yn "Symbols (→ ≠ × · ° € œ)" && picked+=("$catalog/symbols.json")
|
||
ask_yn "Structure (todo, link, img, table, code)" && picked+=("$catalog/structure.json")
|
||
ask_yn "Prose (booknotes, reference, bias, capture, standard)" && picked+=("$catalog/prose.json")
|
||
if [ "${#picked[@]}" -gt 0 ]; then
|
||
jq -s 'add' "${picked[@]}" > "$snips"
|
||
echo "wrote .typoena.snippets.json ($(jq 'length' "$snips") snippets, ${#picked[@]} group(s))"
|
||
else
|
||
echo "no groups chosen — skipping .typoena.snippets.json"
|
||
fi
|
||
fi
|
||
|
||
# Resolve + write <vol>/typoena.conf (Wi-Fi + PAT + git identity). Each value
|
||
# runs a ladder: firmware/.env (loaded via `set dotenv-load`) → derived from
|
||
# tools already on the machine (git config, gh, the active Wi-Fi network + its
|
||
# System-keychain password) → interactive prompt, with the derived value as the
|
||
# default. So a newcomer needs no .env: they Enter through the defaults and paste
|
||
# a PAT once. The PAT is never derived (a broad `gh auth token` on plaintext
|
||
# removable media would defeat the scoped-token model) and never echoed. FAT has
|
||
# no file permissions, so physical custody of the card is the control: use a
|
||
# fine-grained PAT (contents:write on just the notes repo) so a lost card is a
|
||
# one-token revoke. <repo_src> (optional) seeds the git remote; without it the
|
||
# remote is derived from the card's existing clone.
|
||
_write-conf vol repo_src="":
|
||
#!/usr/bin/env bash
|
||
set -euo pipefail
|
||
conf="{{vol}}/typoena.conf"
|
||
repo_src="{{repo_src}}"; repo_src="${repo_src%/}"
|
||
interactive=1; [ -t 0 ] || interactive=0
|
||
|
||
# ask "label" "default" → chosen value on stdout; prompt shown on stderr (so
|
||
# it survives the $(...) capture). Non-interactive → returns the default.
|
||
ask() {
|
||
local label="$1" def="${2:-}" ans
|
||
if [ "$interactive" = 0 ]; then printf '%s' "$def"; return; fi
|
||
read -r -p " $label${def:+ [$def]}: " ans || ans=""
|
||
printf '%s' "${ans:-$def}"
|
||
}
|
||
# like ask but hides input (secrets). A present default reads as "keep current".
|
||
ask_secret() {
|
||
local label="$1" def="${2:-}" ans
|
||
if [ "$interactive" = 0 ]; then printf '%s' "$def"; return; fi
|
||
read -r -s -p " $label${def:+ [keep current]}: " ans || ans=""; printf '\n' >&2
|
||
printf '%s' "${ans:-$def}"
|
||
}
|
||
|
||
# ── derive defaults (silent; empty when a tool is missing/unauthed) ──────────
|
||
# remote: .env → source repo's origin → the card's existing clone.
|
||
remote="${TW_REMOTE_URL:-}"
|
||
if [ -z "$remote" ] && [ -n "$repo_src" ] && [ -d "$repo_src/.git" ]; then
|
||
remote="$(git -C "$repo_src" remote get-url origin 2>/dev/null || true)"
|
||
fi
|
||
if [ -z "$remote" ] && [ -d "{{vol}}/{{sd_repo_dir}}/.git" ]; then
|
||
remote="$(git -C "{{vol}}/{{sd_repo_dir}}" remote get-url origin 2>/dev/null || true)"
|
||
fi
|
||
a_name="${TW_AUTHOR_NAME:-$(git config user.name 2>/dev/null || true)}"
|
||
a_email="${TW_AUTHOR_EMAIL:-$(git config user.email 2>/dev/null || true)}"
|
||
gh_user="${TW_GH_USER:-}"
|
||
[ -z "$gh_user" ] && gh_user="$(gh api user --jq .login 2>/dev/null || true)"
|
||
# ssid: .env → the Mac's active Wi-Fi network.
|
||
wifi_if="$(networksetup -listallhardwareports 2>/dev/null | awk '/Wi-Fi/{getline; print $2; exit}')"
|
||
ssid="${TW_WIFI_SSID:-}"
|
||
[ -z "$ssid" ] && ssid="$(networksetup -getairportnetwork "${wifi_if:-en0}" 2>/dev/null | sed -n 's/^Current Wi-Fi Network: //p')"
|
||
wifi_pass="${TW_WIFI_PASS:-}"
|
||
pat="${TW_PAT:-}"
|
||
|
||
# ── confirm / fill via prompts ──────────────────────────────────────────────
|
||
[ "$interactive" = 1 ] && echo "configuring $conf — press Enter to accept each [default]:" >&2
|
||
ssid="$(ask "Wi-Fi SSID" "$ssid")"
|
||
# Keychain read happens after the SSID is final (the user may have edited it).
|
||
# Reading a System-keychain Wi-Fi password can pop a macOS auth dialog — only
|
||
# attempt it interactively so scripted runs never trigger a surprise prompt.
|
||
if [ -z "$wifi_pass" ] && [ -n "$ssid" ] && [ "$interactive" = 1 ]; then
|
||
echo " looking up Wi-Fi password for '$ssid' in Keychain (approve the macOS dialog if it appears)…" >&2
|
||
wifi_pass="$(security find-generic-password -wa "$ssid" 2>/dev/null || true)"
|
||
fi
|
||
wifi_pass="$(ask_secret "Wi-Fi password" "$wifi_pass")"
|
||
remote="$(ask "Git remote URL" "$remote")"
|
||
gh_user="$(ask "GitHub username" "$gh_user")"
|
||
pat="$(ask_secret "GitHub PAT (fine-grained, contents:write)" "$pat")"
|
||
a_name="$(ask "Commit author name" "$a_name")"
|
||
a_email="$(ask "Commit author email" "$a_email")"
|
||
|
||
# ── require the essentials (a blank config ships a dead device) ──────────────
|
||
missing=""
|
||
[ -n "$ssid" ] || missing="$missing Wi-Fi-SSID"
|
||
[ -n "$remote" ] || missing="$missing git-remote-URL"
|
||
[ -n "$pat" ] || missing="$missing GitHub-PAT"
|
||
if [ -n "$missing" ]; then
|
||
echo "error: missing required config:$missing" >&2
|
||
[ "$interactive" = 0 ] && echo " (no TTY — set these in firmware/.env or run interactively)" >&2
|
||
exit 1
|
||
fi
|
||
|
||
# ── write ───────────────────────────────────────────────────────────────────
|
||
{
|
||
printf '# Typoena runtime config — generated by `just init`/`provision`.\n'
|
||
printf '# Plaintext secrets on removable media: keep the card safe; scope TW_PAT\n'
|
||
printf '# to contents:write on just the notes repo. `key=value`, `#` = comment.\n'
|
||
printf 'TW_WIFI_SSID=%s\n' "$ssid"
|
||
printf 'TW_WIFI_PASS=%s\n' "$wifi_pass"
|
||
printf 'TW_REMOTE_URL=%s\n' "$remote"
|
||
printf 'TW_GH_USER=%s\n' "$gh_user"
|
||
printf 'TW_PAT=%s\n' "$pat"
|
||
printf 'TW_AUTHOR_NAME=%s\n' "$a_name"
|
||
printf 'TW_AUTHOR_EMAIL=%s\n' "$a_email"
|
||
} > "$conf"
|
||
mask() { if [ -n "${1:-}" ]; then printf 'set'; else printf 'MISSING'; fi; }
|
||
echo "wrote $conf (secrets never printed):"
|
||
echo " wifi: ssid=$(mask "$ssid") pass=$(mask "$wifi_pass")"
|
||
echo " git: remote=$(mask "$remote") gh_user=$(mask "$gh_user") pat=$(mask "$pat")"
|
||
echo " author: name=$(mask "$a_name") email=$(mask "$a_email")"
|
||
|
||
# Flush + eject so the card can go straight into Typoena.
|
||
_eject vol:
|
||
#!/usr/bin/env bash
|
||
set -euo pipefail
|
||
sync
|
||
echo "ejecting {{vol}}"
|
||
if diskutil eject "{{vol}}" >/dev/null 2>&1; then
|
||
echo "✅ card ejected — remove it and insert into Typoena"
|
||
else
|
||
echo "⚠️ eject failed (a file may still be open) — eject '{{vol}}' from Finder before removing"
|
||
fi
|