# Rust often needs a bit of an extra main task stack size compared to C (the default is 3K)
# You might have to increase this further if you allocate large stack variables in the main task.
# Bumped for the TLS handshake (Spike 6): mbedtls runs on the calling task and
# wants several KB of stack on top of the app's own usage.
# Bumped hard for Spike 7: libgit2's call chain is stack-hungry. Nearly every
# function puts a `char path[GIT_PATH_MAX]` (4 KB) buffer on the stack, and the
# repository_init → config-write → FATFS → wear-leveling chain nests ~10 of them
# deep — a trivial config write measured ~67 KB of stack on hardware, overflowing
# the previous 48 KB and smashing an adjacent newlib lock handle (LoadProhibited
# in xQueueGenericSend). The push (smart-HTTP + pack + mbedTLS) is deeper still.
# NOTE: this earlier looked like "time() only works on the main task" — but that
# iteration ran git on a std::thread with the default 4 KB stack; the same chain
# just overflowed sooner. It's stack depth, not thread-vs-main.
# CAVEAT: this sdkconfig is shared with the editor build, so the editor also
# reserves this stack for nothing. Once the push is proven, git should move to a
# dedicated large-stack task and this can drop back to ~16 KB.
CONFIG_ESP_MAIN_TASK_STACK_SIZE=98304

# Increase a bit these stack sizes as they are also a bit too small by default
CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=4096
CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=4096

# You might have to increase this further if you spawn your own Rust threads
# that allocate large stack variables; or better yet - use
# `std::thread::Builder::new().stack_size(XXX)` for spawning
CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=4096

# Raise the compile-time log ceiling so the sdmmc/sdspi drivers' per-command
# DEBUG logs (the raw R1 response bytes) are built in. Runtime level stays INFO
# by default; the SD spike bumps just the sdmmc/sdspi tags to DEBUG so we can see
# exactly what each init command returns. (Diagnostic for Spike 3 init failures.)
CONFIG_LOG_MAXIMUM_LEVEL_DEBUG=y

# FatFS long filenames (Spike 3 — SD). Default is 8.3-only, which rejects the
# persistence module's atomic-save temp name (`notes.md.tmp` has two dots).
# LFN on the heap keeps the working buffer off the (small) task stack.
CONFIG_FATFS_LFN_HEAP=y

# PSRAM (Spike 7 — the git working set needs it; the docs memory plan budgets
# ~1.5 MB PSRAM for pack/delta work, and the rope buffer lives there too). This
# board is an ESP32-S3-WROOM-1-N16R8 → 8 MB *octal* PSRAM, so OCT mode is
# required (quad would fail to init). USE_MALLOC adds PSRAM to the heap
# allocator, so large allocations (Box, Rope, libgit2 buffers) land there
# instead of the ~339 KB internal DRAM Spike 6 measured. Octal PSRAM occupies
# GPIO 33–37; the EPD/SD pins (4–13) deliberately avoid that range, so no wiring
# conflict. Speed left at the 40 MHz default (safe first-enable; 80 MHz needs
# matching flash-freq config and is a later tuning step).
CONFIG_SPIRAM=y
CONFIG_SPIRAM_MODE_OCT=y
CONFIG_SPIRAM_USE_MALLOC=y

# TLS trust store (Spike 6 — Wi-Fi + TLS, the gate for Spike 7 git push).
# The certificate bundle backs esp_crt_bundle_attach so an HTTPS GET to
# api.github.com validates against real roots. FULL rather than the common
# subset so a less common CA in the chain can't surprise us on the bench.
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y
CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y