Adds the extra_components metadata, git2 as an optional dep behind the
`git` feature (default-features off -> no openssl-sys/libssh2-sys), and a
git_smoke bin gated on it. libgit2-sys/libz-sys run in system mode against
fake pkg-config files (empty Libs) so they emit no link flags -- symbols
come from the esp-idf component. Proven on device: git2 version + a blob
SHA1 through the mbedTLS backend.
Standalone bench program (src/bin/sd_fat.rs, `just flash-sd`) that mounts
FAT over the EPD's shared SPI2 bus and proves the persistence module's
atomic save: write .tmp, fsync, rename, read back and compare.
Runs SD-only: the EPD's SpiBusDriver holds an exclusive bus lock for its
lifetime, so an arbitrated SD device can't be live alongside it yet. Keeps
CRC required and maps a card that rejects CMD59 to a clear "use a genuine
card" message rather than running the user's notes over an unchecked bus.
sdkconfig gains CONFIG_FATFS_LFN_HEAP (the atomic-save .tmp name isn't valid
8.3) and, temporarily, CONFIG_LOG_MAXIMUM_LEVEL_DEBUG to read the drivers'
per-command R1 bytes during bring-up.
Standalone `wifi_tls` binary: station assoc, SNTP, then a validated
HTTPS GET to api.github.com against the esp-idf cert bundle. Gates
Spike 7 (gitoxide push). Creds come from firmware/.env via build.rs.
Add a thin dual-SSD1683 driver (src/epd.rs, ported from GxEPD2's
GxEPD2_579_GDEY0579T93) for the 792x272 e-paper panel: reset/init,
RAM addressing, the split-and-mirror full-frame blit across the
master/slave seam at x=396, and full-refresh waveform. Frame
implements embedded-graphics' DrawTarget.
Replace the Spike 1 blink harness in main.rs with the Spike 2 test:
SPI at 4 MHz over SCK 12 / DIN 11 / CS 7 / DC 6 / RST 5 / BUSY 4,
alternating normal/inverted frames with a seam-straddling circle,
"Typoena", and the build tag. Verified on hardware 2026-07-04.
Generated from esp-rs/esp-idf-template for the ESP32-S3 std target.
src/main.rs toggles GPIO 2 every 500 ms and logs `blink N` over USB-
serial — the minimum bring-up surface called out in
docs/v0.1-mvp-technical.md (Spike 1: confirm toolchain, flash, and basic
GPIO). edition=2024 with rust-version=1.85.
No editor/render/git/usb/fs modules yet; those land per the spike
methodology when later spikes need them.
