Parse the Zed-compatible .typoena.snippets.json (serde_json), strip
${n:label} stops to bare $n, and drive a forward-only tab-stop session.
Expand a prefix inline on Tab in Insert; browse and insert from the
Cmd-P palette via a $ sigil (parallel to the > command mode), landing
on $1 as one undo group.
Generalise the palette so Enter advances any pref to its next value and
wraps; a boolean toggle is the two-option case. Both string prefs share a
next_option(current, &OPTIONS) helper (off-list values snap to the head).
- theme (light/dark): rendered as a single whole-frame Frame::invert at the
end of draw(), so text, selection, caret, panel and palette flip together.
- auto_sync: cycles 2m/5m/10m/15m/30m. Set-ahead only — still read by
nothing until the v0.7 periodic push.
toggle_pref -> cycle_pref; palette hint "Enter toggle" -> "Enter change".
Read notes verbatim and insert the final newline only when it is missing,
instead of stripping the terminator on load and appending it unconditionally
on save. The editor's `rows = #\n + 1` model then renders a file's POSIX
terminator as a visible trailing blank line — what a writer expects: open a
note and see (and land the caret on) the empty line the newline stands for.
Supersedes the strip-on-load / unconditional-append handling that shipped
with the prefs work (c535864), which kept the buffer newline-free and hid the
terminator. Load + save are now an identity round-trip for any device-written
file (all end in '\n'); files stay git-clean (exactly one terminator); and a
trailing blank line the writer leaves is mirrored, never doubled.
- load_path: read verbatim (drop the strip)
- save_path: guarded final-newline (drop the unconditional append)
- Prefs::to_toml: ends in a newline again — the guarded save leaves exactly
one, so the prefs file is byte-identical to before and its device-verified
round-trip still holds
- sd_fat spike: payload ends in '\n' so its exact-equality round-trip holds
Git-tracked editor preferences read at boot and toggled live on-device:
- Prefs type (line-based TOML parse/serialize, no crate on xtensa) held on
Editor; firmware reads /sd/repo/.typoena.toml before the first render and
falls back to per-key defaults. Keys: save_on_idle, format_on_save,
line_numbers (bool) + auto_sync (string, schema/default only until v0.7).
- line_numbers applied live (gutter_cols -> 0 when off).
- Palette > command mode toggles the three bools; the list stays open so
several flip in one visit, and :settings opens it directly. Each toggle
applies live and queues Effect::SavePrefs (host atomic-writes the file,
which rides the next :sync).
- save_on_idle honoured host-side as a silent, unformatted idle auto-save.
- to_toml is newline-free; save_path now appends exactly one terminator
unconditionally so buffers round-trip byte-for-byte (trailing blanks kept).
- Firmware 0.4.0 -> 0.5.0; new docs/typoena-toml.md reference. Also refreshes
the slice-3 macroplan status (delete fix was confirmed on device).
:enew <name> creates a new file (empty, dirty, added to the palette list);
:delete unlinks the current file via a new Effect::Delete and switches to a
parked buffer or scratch. Scope is read from the path (local/x, repo/x) rather
than a modal prompt, and the /sd prefix is now optional in resolve_path.
On-device testing showed deletions never reached the remote: add_all(["*"])
alone does not stage a removal on this libgit2, so the tree came back unchanged
and the push was a silent no-op. stage_and_commit now runs add_all then
update_all(["*"]) (git add -u) — together git add -A. The :delete snackbar now
confirms the scoped file and flags that a Tracked file is local until :sync.
Cmd-P opens a modal transient palette over the writing column: a bare
fuzzy-search input, the ranked file list, and the selected row in reverse
video. A pure host-testable fuzzy_score (subsequence + word-boundary and
consecutive-run bonuses) ranks results; an in-core MRU floats recently
opened files first and is shared with :e (both route through open_path).
The host feeds the file list once at boot (enumerate_files over /sd/repo
and /sd/local). Ctrl-n/Ctrl-p navigate the list; Enter opens via the same
park/evict path as :e; Esc closes.
Ctrl-n/Ctrl-p also become down/up line motions in Normal and View (vim
CTRL-N/CTRL-P, count-aware), which is why the palette opener is Cmd-P
alone. No `>` prefix on the file input — `>` is reserved for the command
palette (slice 4).
112 editor + 28 keymap tests; the no-git firmware binary builds clean.
Rework the single Effect return into a drained effect queue
(Save{path,scope,contents} / Load / Publish / Pull) so one action can
ask the host for several ordered steps: opening a non-resident file
queues a Save of the outgoing dirty buffer then a Load of the target.
Keep the active buffer's fields inline on Editor and park inactive
buffers in a small LRU (<=3 resident = active + 2); switching back to a
resident buffer restores its caret/scroll/undo without touching the SD.
A dirty parked buffer is saved before eviction, so nothing leaves RAM
unsaved. `:e <path>` opens by prefix (/sd/repo -> Tracked, /sd/local ->
Local); `:sync` is refused in-core for a Local buffer.
Firmware drains the queue to empty each batch (a Load can cascade an
eviction Save) and persistence generalises the atomic save off the
hard-coded notes.md into load_path/save_path.
Also bump the side panel to FONT_9X15 and the `:` command line to
FONT_10X20 for legibility, word-wrapping the snackbar so a long notice
keeps its actionable tail.
Charwise `v` and linewise `V` selection with yank/delete/change on the
span; motions and counts extend it. Read-only View moves off v/V to
`gr` (go-read). Selection renders reverse-video on the 1-bit panel.
Normal motions factored into a shared move_by. Firmware -> 0.4.0.
A multi-line paste near the bottom of the screen left its later lines below
the viewport — adjust_scroll only kept the caret's (first) pasted line
visible. Add reveal(), which scrolls the end of the pasted block into view
while the caret stays on its first line (vim semantics unchanged).
Yank/paste via one unnamed register: `y` operator (yy/yw/yiw/y$), `p`/`P`,
with `x`/`d`/`c` also filling it so `dd`…`p` moves a line. Undo/redo (`u`,
`Ctrl-r`) as bounded full-buffer snapshots — one Insert session is one undo
group. `.` replays the last change from its recorded keystrokes, so it
repeats insert sessions like `ciwfoo<Esc>`.
Run :fmt in-core before :w/:sync emit their effect, so :sync is
fmt -> save -> commit -> push and :w saves formatted. Gated on the
format_on_save field (default on); the v0.5 .typoena.toml key will drive it.
Add Effect::Pull and the `:gl` command (fetch + fast-forward only, refuse on
divergence). The editor side is host-tested; the firmware arm is a stub posting
"pull: not wired yet (v0.7)" — the on-device fetch/fast-forward in git_sync is
v0.7 work (only push is wired today).
Handle DeleteWord (Ctrl-W) and DeleteLine (Cmd-Backspace) in Command mode:
Ctrl-W drops the previous word, Cmd-Backspace clears the line. Neither exits to
Normal on empty (unlike Backspace), so command editing stays on the line.
Reserve a left gutter for absolute line numbers, drawn on each logical line's
first display row and blank on wrapped continuation rows. Gutter width tracks
the buffer's line count (2 digits + separator, widening past 99 lines) and
steals its columns from the soft-wrap. Widen the writing region 60->63 cols so
the gutter doesn't narrow the text: a file up to 99 lines keeps a full 60-col
text column, at the cost of the side panel shrinking 30->25 cols.
Decode Ctrl+D/Ctrl+U as HalfPageDown/HalfPageUp intents (matching the existing
DeleteWord/DeleteLine chord pattern, so the editor stays ignorant of Ctrl).
They step display (soft-wrapped) rows, not logical lines, so half a page is
half the visible window regardless of how prose wraps: Normal moves the caret
and the viewport follows, View scrolls the viewport, Insert/Command are no-ops.
Two boot/panel UX changes that share the editor's constructor, so they
land in one commit:
- Power-on mode is now Normal (was Insert). with_text() opens a loaded
note in Normal with the caret on the last char (the resume point);
draw(false) now suppresses the caret in every mode, so the boot-error
screen renders as pure text rather than sprouting a block caret.
- notice/set_notice(): a transient side-panel message ("snackbar")
drawn under the word count and cleared on the next keystroke — no
timed repaint, which on e-ink would cost a ~630 ms flash to erase.
The host had no way to read the buffer out or seed it from a loaded
file. with_text lands the caret at the end so boot-load resumes writing
where the user left off; text() exposes the buffer for :w/:sync.
Match the workspace convention (firmware, keymap already ignore their
lockfiles); these two library crates just never got a .gitignore when
they were extracted.
The pure, no-IO editor core can't persist or push, so `handle()` now
returns an `Effect` (None/Save/Publish) that the firmware actions. `:w`
signals Save, `:sync` signals Publish (save then git push); `:wq`/`:x`
alias Save with vim's "quit" half dropped, and the `:q` family stays
absent — an always-on appliance has nothing to quit to. `:fmt` remains
in-core and yields no effect.
The main loop keeps the batch's last effect and matches on it. Actual
SD-write and git-push are the v0.1 gate and still stubbed as log lines.
Step whole characters everywhere instead of assuming 1 byte = 1 char, so
the dead-key composer's accented Latin-9 output (é, ç, …) no longer traps
the caret mid-character and panics on the next edit. Covers h/l/a and the
Escape step-back, j/k column math, backspace and x, word-end (e) with
de/ce, and layout/caret_rc (byte offsets vs display columns). Adds 7
accented-input tests (15 total).
Move the editor core out of the firmware crate (pinned to the xtensa
target, so it can't run `cargo test`) into a standalone `editor` crate,
with the panel framebuffer + geometry split into a `display` crate. Both
depend only on embedded-graphics + keymap, so the editor is now
host-buildable and unit-tested (8 characterization tests). Firmware links
them and re-exports the geometry from epd.rs; behaviour is unchanged.
The xtensa firmware build was not verified in this environment.
