The pure, no-IO editor core can't persist or push, so `handle()` now
returns an `Effect` (None/Save/Publish) that the firmware actions. `:w`
signals Save, `:sync` signals Publish (save then git push); `:wq`/`:x`
alias Save with vim's "quit" half dropped, and the `:q` family stays
absent — an always-on appliance has nothing to quit to. `:fmt` remains
in-core and yields no effect.
The main loop keeps the batch's last effect and matches on it. Actual
SD-write and git-push are the v0.1 gate and still stubbed as log lines.
Move the editor core out of the firmware crate (pinned to the xtensa
target, so it can't run `cargo test`) into a standalone `editor` crate,
with the panel framebuffer + geometry split into a `display` crate. Both
depend only on embedded-graphics + keymap, so the editor is now
host-buildable and unit-tested (8 characterization tests). Firmware links
them and re-exports the geometry from epd.rs; behaviour is unchanged.
The xtensa firmware build was not verified in this environment.
Carve the panel into a ~60-col writing column and a right-hand side
panel (per CONTEXT.md screen regions); the divider sits right of the
x=396 driver seam. The mode indicator and pending-command echo move
into the panel, while the ':' command line stays in the bottom strip.
The panel also shows word count and words-this-session (a snapshot
refreshed on a typing pause / non-Insert action, never per keystroke,
so ordinary typing keeps the fast windowed refresh) and a "NO KBD"
flag while the keyboard is dropped.
Per keystroke, diff the new frame against the last shown one to find the
changed row band and partial-refresh only those rows instead of all 272.
E-paper update time scales with the gate rows driven, so a single edited
text line refreshes far faster. Windowed in Y only (full width, both
controllers), so the seam/mirroring logic is unchanged. Also drop the
periodic full refresh to every 64 updates — the panel stays visually
clean, so it's now mainly for longevity.
Spike 5 — first spike where keyboard input and panel output run
together. usb_kbd changes from a blocking run() into start(): it brings
the USB host stack up on background threads and pushes edge-detected,
US-layout-translated key-downs onto a queue drained via next_key().
main.rs owns the panel, maintains a wrapped/scrolling text buffer, and
partial-refreshes per keystroke batch with a periodic full refresh to
clear ghosting. Logs per-refresh latency.
Spike 4. Drive the ESP-IDF USB Host Library directly through the raw
esp-idf-sys bindings (the convenience HID class driver is a managed
component not vendored in mainline, and a boot keyboard doesn't need
it). On attach, src/usb_kbd.rs enumerates the device and dumps its
descriptors, claims the boot-keyboard interface, sends SET_PROTOCOL(boot)
and SET_IDLE(0), then polls the interrupt-IN endpoint and decodes each
8-byte report into modifiers + keycodes logged over UART.
main.rs becomes the Spike 4 harness; the epd module is kept compiled
(allow(dead_code)) so it doesn't bit-rot. Verified on hardware with a
19f5:3255 keyboard: letters, digits, modifiers, and rollover all decode.
Add a thin dual-SSD1683 driver (src/epd.rs, ported from GxEPD2's
GxEPD2_579_GDEY0579T93) for the 792x272 e-paper panel: reset/init,
RAM addressing, the split-and-mirror full-frame blit across the
master/slave seam at x=396, and full-refresh waveform. Frame
implements embedded-graphics' DrawTarget.
Replace the Spike 1 blink harness in main.rs with the Spike 2 test:
SPI at 4 MHz over SCK 12 / DIN 11 / CS 7 / DC 6 / RST 5 / BUSY 4,
alternating normal/inverted frames with a seam-straddling circle,
"Typoena", and the build tag. Verified on hardware 2026-07-04.
The DevKitC-1 has no discrete LED on GPIO 2, so the Spike 1 blink was
invisible without external wiring. Drive the on-board addressable LED
(WS2812 on GPIO 48) each cycle for visible confirmation on the bench.
Generated from esp-rs/esp-idf-template for the ESP32-S3 std target.
src/main.rs toggles GPIO 2 every 500 ms and logs `blink N` over USB-
serial — the minimum bring-up surface called out in
docs/v0.1-mvp-technical.md (Spike 1: confirm toolchain, flash, and basic
GPIO). edition=2024 with rust-version=1.85.
No editor/render/git/usb/fs modules yet; those land per the spike
methodology when later spikes need them.
