docs(sync): merge the commit handoff into the staging tradeoff curve
The bench phase the handoff was written for is closed (splice benched, fast-seek landed, cache removed, decision made), so the note's live half — the firmware plumbing plan — moves into sync-commit-staging.md as "The fix — wiring the O(depth) splice into the firmware", reconciled to the run-5 state. The duplicated TL;DR/measurement summaries are dropped in favor of the curve's own trail; inbound references (notes index, git_bench comments) now point at the curve.
This commit is contained in:
Julien Calixte
@@ -12,4 +12,3 @@
|
||||
| [`git-sync-images-and-repo-size.md`](git-sync-images-and-repo-size.md) | Why we don't shrink the notes repo — its 153 MB of media is remanso's image CDN, so rewriting history to slim the on-device clone breaks the web app. |
|
||||
| [`boot-time-budget.md`](boot-time-budget.md) | Where the ~4.3 s to cursor goes — and why the ≤ 3 s v1.0 target is hard: one ~1.9 s full refresh is unavoidable at cold boot, so the splash is nearly free. |
|
||||
| [`sync-latency.md`](sync-latency.md) | Where the ~16 s cold `:sync` goes — Wi-Fi + SNTP + one TLS push; why optimistic-retry cut a whole handshake, and why the rest is close to the protocol floor. |
|
||||
| [`sync-commit-handoff.md`](sync-commit-handoff.md) | **Handoff:** the on-device commit must become an O(depth) TreeBuilder walk — `add_all`/`index.write` re-hash the whole 570 MB-pack tree (611 s / OOM) and the real repo has never synced. Design + firmware plumbing + bench steps for the next session. |
|
||||
|
||||
@@ -1,218 +0,0 @@
|
||||
# Handoff — the on-device commit must become an O(depth) TreeBuilder walk
|
||||
|
||||
> **Start here if you're picking up `:sync` performance.** Written 2026-07-12 after
|
||||
> benching `git_bench` on a full clone of the real `jcalixte/notes` repo. Full
|
||||
> analysis + numbers: [`../tradeoff-curves/sync-commit-staging.md`](../tradeoff-curves/sync-commit-staging.md).
|
||||
> Latency memory: `sync-timing`. Why the repo can't shrink:
|
||||
> [`git-sync-images-and-repo-size.md`](git-sync-images-and-repo-size.md).
|
||||
|
||||
## TL;DR
|
||||
|
||||
The current `firmware::git_sync::stage_and_commit` (`add_all` → `index.write` →
|
||||
`write_tree`) **cannot commit the real repo** — it is O(N_tree) and the real repo is
|
||||
1179 files / 158 dirs / 570 MB pack / 150 MB of images. Measured on device:
|
||||
|
||||
- `index.write()` re-hashes the whole working tree → **up to 611 s** (10-min freeze).
|
||||
- The index-free alternative (`Index::new` + `read_tree(HEAD)` + `write_tree_to`)
|
||||
still reads the whole tree cold → **77 s**, and drove the `esp_map.c` mmap cache
|
||||
to 7.4 MB, starving zlib so `repo.blob()` crashed (`zlib (5)`, 508 KB heap left).
|
||||
|
||||
**The real repo has almost certainly never completed a `:sync` on device** — only
|
||||
the toy `typoena-test` (`notes.md`) has. The repo cannot be shrunk (the 150 MB of
|
||||
images serve another app — see the images note). So the fix is a **new commit
|
||||
mechanism**, not a tuning knob.
|
||||
|
||||
> **Splice bench result (2026-07-12, later the same day): 6.5 s — do NOT wire it
|
||||
> in yet.** The walk is in `git_bench` (`splice stage→tree`) and its O(depth)
|
||||
> shape is confirmed on the real repo (flat pack reads, heap healthy, no OOM),
|
||||
> but each of its 4 loose-object writes costs **~1.5 s** — isolated `odb.write`
|
||||
> regressed 142 ms → 1.5 s vs the previous run, with **0 mmap-cache hits**.
|
||||
> Projected full commit ≈ 8–9 s.
|
||||
>
|
||||
> **Root cause found the same evening (sd_bench seek op): FatFS lseek walks the
|
||||
> FAT cluster chain** — seek+read(4 KB) into the 263 MB pack costs **198.7 ms at
|
||||
> the end vs 5.8 ms at offset 0**, and each loose write pays ~8 such walks via
|
||||
> the freshen path's small `p_mmap`s → the ~1.5 s. Fix landed in
|
||||
> `sdkconfig.defaults`: `CONFIG_FATFS_USE_FASTSEEK=y` +
|
||||
> `FAST_SEEK_BUFFER_SIZE=256` (O(1) lseek for read-mode files, i.e. the pack —
|
||||
> see [FatFS f_lseek/CLMT](http://elm-chan.org/fsw/ff/doc/lseek.html) and the
|
||||
> [ESP-IDF FatFS docs](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/storage/fatfs.html)).
|
||||
> **Verified on device: far seek 198.7 → 20.4 ms.** The A/B (splice 6.5 → 2.8 s,
|
||||
> odb.write 1.5 s → 416 ms) plus new probes then localized the residual to ~7–8
|
||||
> repeated small (~4 KB) pack reads per op that the mmap cache's 64 KB floor
|
||||
> excluded (`odb.read_header(packed)` = 470 ms; the strict-object-creation
|
||||
> theory was refuted — strict-off changed nothing). **esp_map.c v2 built**:
|
||||
> cache admission keyed on FILE size ≥ 1 MB so the hot small windows cache, and
|
||||
> evict-on-`p_munmap` to a 2 MB low-water mark fixes the 7.4 MB OOM.
|
||||
>
|
||||
> **Final `git_bench` verdict (run 4, same evening): the memory fix is
|
||||
> VERIFIED (resident 1833 KB flat, 6.4 MB heap free all run — no OOM), the
|
||||
> window-cache theory is REFUTED (v2 retains the small maps and still scored
|
||||
> 0 hits in 313 misses — the small reads hit unique offsets every time;
|
||||
> `mwindow` already absorbs true repetition), and the sub-second bar FAILED:
|
||||
> splice 2.83 s cold / ~2 s steady-state, commit(None) 713 ms. Decision:
|
||||
> WIRE IT IN ANYWAY** — ~2–2.8 s on the real repo vs 611 s/OOM for every
|
||||
> alternative puts a full cold `:sync` at ~9–10 s, which ships. The residual
|
||||
> ~360 ms/loose-write ≈ 8 unique small SD round-trips; next suspect is FAT
|
||||
> directory-op cost in freshen/refresh (instrumentation pass for later, not a
|
||||
> prerequisite). **The cache was then REMOVED entirely (run 5 confirmation):
|
||||
> esp_map.c is now the plain malloc-read/free-at-munmap emulation** — run 5's
|
||||
> read pattern was byte-identical to run 4 (even 15 reads better; v2's
|
||||
> eviction fought mwindow), warm splice identical at 1.95 s, and the ~1.85 MB
|
||||
> "resident" turned out to be mwindow's live open-window set, not cache
|
||||
> retention — which is one more reason the mwindow opts below are mandatory
|
||||
> in shipping `git_sync.rs`. **Proceed with the firmware plumbing below.**
|
||||
> Full trail: the splice-bench, root-cause, second-localization and
|
||||
> final-bench sections of the tradeoff curve.
|
||||
|
||||
## The fix — O(depth) TreeBuilder walk
|
||||
|
||||
Rebuild only the edited file's ancestor subtree chain onto HEAD's tree. Never
|
||||
materialise the 1179-entry index; never `index.write()`; never `read_tree` the whole
|
||||
tree. Cost is O(depth × dirty_files), flat in repo size, tiny heap, and it carries
|
||||
every unchanged entry (all 260 images, the other 1176 files) forward untouched —
|
||||
which means **the device doesn't even need the images in its working tree.**
|
||||
|
||||
Sketch (git2 0.20 API — all present: `Repository::treebuilder(Option<&Tree>)`,
|
||||
`TreeBuilder::{insert,remove,write}`, `Tree::{get_name,get_path}`,
|
||||
`TreeEntry::{to_object,filemode}`):
|
||||
|
||||
```rust
|
||||
/// Return a new tree OID = `base` with `path` set to `new` (Some(blob_oid) to
|
||||
/// add/replace, None to delete). Reads ~depth subtree objects, writes ~depth trees.
|
||||
fn splice(repo: &Repository, base: &Tree, path: &[&str], new: Option<Oid>) -> Result<Oid> {
|
||||
let (head, rest) = path.split_first().unwrap();
|
||||
if rest.is_empty() {
|
||||
// leaf level: patch this tree directly
|
||||
let mut tb = repo.treebuilder(Some(base))?;
|
||||
match new {
|
||||
Some(oid) => tb.insert(head, oid, 0o100644)?, // FileMode::Blob
|
||||
None => { tb.remove(head).ok(); } // delete
|
||||
};
|
||||
return Ok(tb.write()?);
|
||||
}
|
||||
// descend: find (or synthesize) the subtree, recurse, re-insert its new OID
|
||||
let sub = base.get_name(head)
|
||||
.and_then(|e| e.to_object(repo).ok())
|
||||
.and_then(|o| o.peel_to_tree().ok());
|
||||
let empty; let sub_ref = match &sub { Some(t) => t, None => { empty = repo.treebuilder(None)?; /* ... */ unreachable!() } };
|
||||
let new_sub = splice(repo, sub_ref, rest, new)?;
|
||||
let mut tb = repo.treebuilder(Some(base))?;
|
||||
// if new_sub is the empty tree and this was a delete, remove the dir entry instead
|
||||
tb.insert(head, new_sub, 0o040000)?; // FileMode::Tree
|
||||
Ok(tb.write()?)
|
||||
}
|
||||
```
|
||||
|
||||
Then, for the dirty set, fold each change through `splice` (thread the running root
|
||||
tree), and `commit(Some("HEAD"), …, &final_tree, &[&parent])`. Edge cases to handle:
|
||||
new files where an intermediate dir doesn't exist yet (build subtree from `None`),
|
||||
deletes that empty a directory (remove the dir entry rather than insert an empty
|
||||
tree), and path splitting on `/` (paths are repo-relative POSIX).
|
||||
|
||||
**Bench it first** (per the established discipline): add a `treebuilder splice→tree`
|
||||
op to `firmware/src/bin/git_bench.rs` alongside the existing ones and confirm it's
|
||||
sub-second cold on the real repo, with heap staying healthy (no OOM). Only then wire
|
||||
it into the firmware. While in there, two bench-hygiene fixes: (a) the `edit_path`
|
||||
seed block does the cold `read_tree(HEAD)` **untimed** (the 77 s number came from
|
||||
log timestamps), so the `Index::new + read_tree` bench only ever measures warm —
|
||||
wrap the seed in a timer so a re-run prints the cold number; (b) the "3) THE
|
||||
PROPOSED FIX — index-free commit tree" comment is now stale — the real-repo run
|
||||
refuted that path (77 s + OOM) and this handoff supersedes it — retitle it as the
|
||||
refuted alternative.
|
||||
|
||||
## Firmware plumbing (after the bench validates)
|
||||
|
||||
1. **`firmware/src/git_sync.rs`**
|
||||
- **Set the mwindow options at service start** (before the first
|
||||
`Repository::open`): `git2::opts::set_mwindow_size(256 * 1024)` +
|
||||
`set_mwindow_mapped_limit(4 * 1024 * 1024)`. Today only `git_bench.rs` sets
|
||||
them — the shipping service runs libgit2's 32-bit defaults (**32 MB window /
|
||||
256 MB mapped limit**, mwindow.c:16), so the first pack access on the 570 MB
|
||||
clone would try to `git__malloc` a 32 MB window and die on the 8 MB PSRAM
|
||||
heap before the walk even runs.
|
||||
- Rewrite `stage_and_commit` (currently ~L271–332) to the `splice`-walk above.
|
||||
Drop `add_all`/`update_all`/`index.write`/`index.write_tree`. Keep the
|
||||
`commit split —` timing log, the `tree unchanged → nothing to publish` check,
|
||||
and the signature/message code.
|
||||
- `PublishRequest` (~L79) is currently an **empty struct** — it must carry the
|
||||
dirty set: `{ changed: Vec<(String /*repo-rel path*/, ...)>, deleted: Vec<String> }`.
|
||||
The commit needs the blob content or a way to read it; simplest is to pass the
|
||||
paths and let the git thread `repo.blob_path(abs)` / read `/sd/repo/<path>`.
|
||||
- `reconcile_onto_origin` (~L377/L394) uses `repo.reset(Mixed)` — with an
|
||||
index-free commit there's no index to reset; switch to `ResetType::Soft` (move
|
||||
HEAD only) or drop the reset and just re-`splice` onto the new origin tip.
|
||||
- The macOS-cruft filter (`skip_macos_cruft`) is no longer needed — the walk only
|
||||
ever touches paths the editor explicitly hands it, so `._*`/`.DS_Store` can't
|
||||
sneak in. (Keep a note; don't silently lose the Spike-14 lesson.)
|
||||
- **Deliberate behavior change to record:** the walk commits *only* the
|
||||
editor's dirty set. Files changed on the card outside the editor (e.g. the
|
||||
card mounted on a Mac) were swept in by `add_all` before; they will now never
|
||||
be committed, and the working tree will show a permanent diff against HEAD if
|
||||
inspected on a desktop. Correct for the appliance (it's also what makes the
|
||||
cruft filter unnecessary), but it must be intentional, not accidental.
|
||||
|
||||
2. **Dirty-set source — `firmware/src/persistence.rs` + `main.rs`**
|
||||
- Writes funnel through `Storage::save_path` (~L316) and deletes through
|
||||
`Storage::delete_path` (~L352), both `&self`. Accumulate a dirty/deleted set
|
||||
(needs `RefCell` interior mutability, or move the set up to `main.rs`).
|
||||
- `Effect::Publish` handler in `main.rs` (~L222) builds the `PublishRequest` from
|
||||
that set and clears it on a successful `Pushed`/`UpToDate` outcome.
|
||||
- **FD budget: `main.rs` (~L413) mounts with `Storage::mount()` = 4 open
|
||||
files, and the git thread shares that mount.** libgit2 keeps the pack +
|
||||
`.idx` (+ commit-graph) descriptors open and opens loose objects on top —
|
||||
that's why `git_bench` needed `mount_for_git` (16). On the real repo the
|
||||
shipping `:sync` will fail with "no free file descriptors" long before any
|
||||
latency question. Either mount with the 16-file budget in `main.rs` (the
|
||||
editor's 2-FD peak coexists fine) or split the budgets some other way.
|
||||
|
||||
3. **`esp_map.c` cache fix (same pass) — `firmware/components/libgit2/esp_map.c`**
|
||||
- Bug: cached buffers are freed only lazily in `p_mmap`'s `evict_for`, so a
|
||||
window libgit2 has `p_munmap`'d stays resident until the *next* map — defeating
|
||||
`MWINDOW_MAPPED_LIMIT` and starving non-mmap `git__malloc` (zlib).
|
||||
- Fix: on `p_munmap` when refcount hits 0, evict down to a low-water mark (or free
|
||||
outright); lower `ESP_MAP_CACHE_CAP` (4 MB → ~1.5–2 MB) and/or `SLOTS`.
|
||||
- ⚠️ Editing this `.c` needs the fingerprint dance or the change won't rebuild —
|
||||
see the `esp-idf-component-rebuild` memory:
|
||||
`rm -rf firmware/target/xtensa-esp32s3-espidf/release/.fingerprint/esp-idf-sys-*`
|
||||
then rebuild.
|
||||
|
||||
## How to bench / flash
|
||||
|
||||
`git_bench.rs` runs git ops on the 96 KB `GIT_STACK` thread (the main task stack
|
||||
overflows on these ops — that's why the real service has a dedicated thread). It's
|
||||
Rust-only, so a plain rebuild picks it up (no fingerprint dance unless you also
|
||||
touched `esp_map.c`).
|
||||
|
||||
```
|
||||
just flash-gitbench
|
||||
# = . ~/export-esp.sh && LIBGIT2_SRC=<repo>/firmware/components/libgit2/vendor \
|
||||
# LIBGIT2_NO_VENDOR=1 PKG_CONFIG_ALLOW_CROSS=1 \
|
||||
# PKG_CONFIG_LIBDIR=<repo>/firmware/pkgconfig \
|
||||
# cargo run --release --bin git_bench --features git
|
||||
```
|
||||
|
||||
Bench on the **real repo** clone (`/sd/repo` = full `jcalixte/notes`), not the toy —
|
||||
the toy pack understates everything by ~2 orders of magnitude.
|
||||
|
||||
## What's proven vs open
|
||||
|
||||
**Proven (2026-07-12, real repo):** `index.write` 611 s (whole-tree re-hash via
|
||||
`truncate_racily_clean`, index.c:822 / index.h:117); index-free `read_tree`
|
||||
77–82 s cold (reproduced across both runs); mmap cache OOM at 7.4 MB → zlib crash
|
||||
(reproduced). `Repository::open` ~90–99 ms, odb-open ~6–8 s cold (maps 1.7 MB
|
||||
`.idx`). **Splice walk benched (second run): 6.5 s p50, warm ≈ cold** — O(depth)
|
||||
shape confirmed (flat reads ~40 KB/write, 6.4 MB heap free), cost is 4 loose
|
||||
writes × ~1.6 s. `commit(None)` 1.7 s.
|
||||
|
||||
**Open — the new gating question: why does one loose-object write cost ~1.5 s?**
|
||||
`odb.write(blob)` measured 142 ms in the first real-repo run but 1.5 s in the
|
||||
second (same `esp_map.c`, same card, **0 cache hits** the whole second run) — the
|
||||
two runs are unreconciled. Suspects, cheapest first: (a) FAT free-cluster scan on
|
||||
the ~740 MB-full card → re-run `sd_bench` as-is on this card; (b) loose-write
|
||||
internals (filebuf tmp + rename, per-write `git_odb_refresh` readdir) under the
|
||||
accumulating orphan objects from bench runs → re-provision a fresh clone and A/B;
|
||||
(c) the ~10 small 4 KB `p_mmap`s per write (sub-64 KB, uncacheable) — bounded
|
||||
~100 ms, secondary. Also open: whether the esp_map cache earns its keep at all
|
||||
(0 hits this run), the ref/reflog-update cost on the real repo, and the push
|
||||
(network ~6.5 s) floor — all untouched here.
|
||||
@@ -11,4 +11,4 @@
|
||||
| --- | --- |
|
||||
| [`wifi-auto-sync.md`](wifi-auto-sync.md) | `auto_sync` interval vs Wi-Fi energy (a `1/T` hyperbola) — why the default is 10 min and opportunistic, not a wall-clock timer. |
|
||||
| [`epd-refresh-latency.md`](epd-refresh-latency.md) | E-ink refresh latency vs rows driven — the full / full-area-partial / windowed-Y cost model behind typing responsiveness and the boot splash→editor swap. |
|
||||
| [`sync-commit-staging.md`](sync-commit-staging.md) | Commit-staging strategy vs working-tree size — `add_all(["*"])` (O(tree) FAT walk) vs explicit-path (O(churn)); the walk-vs-writes split that decides whether explicit staging is worth it. |
|
||||
| [`sync-commit-staging.md`](sync-commit-staging.md) | Commit-staging strategy vs working-tree size — RESOLVED: every index-based path is O(N_tree) and fails on the real repo (611 s / OOM); the O(depth) TreeBuilder splice is benched at ~2–2.8 s and ships. Holds the full measurement trail plus the firmware plumbing plan (merged from the retired handoff note). |
|
||||
|
||||
@@ -9,14 +9,17 @@
|
||||
> patch only the edited file's ancestor subtree chain onto HEAD's tree, never
|
||||
> materialise all 1179 entries.
|
||||
>
|
||||
> **Splice-bench update (2026-07-12, later the same day):** the walk was built
|
||||
> into `git_bench` and measured on the real repo — **6.5 s, failing the
|
||||
> sub-second bar.** The O(depth) *shape* holds (flat pack reads, healthy heap),
|
||||
> but each of its 4 loose-object writes costs **~1.5 s** (isolated `odb.write`
|
||||
> regressed from the 142 ms above; the mmap cache scored **0 hits** this run).
|
||||
> Localizing the loose-write cost is now the gating work — see
|
||||
> [Splice bench](#splice-bench-2026-07-12-second-real-repo-run--the-walk-is-right-the-loose-object-write-is-the-new-wall).
|
||||
> Shrinking the repo is **not** an option
|
||||
> **Final state (2026-07-13, after four localization rounds):** the splice walk
|
||||
> is benched and the block is lifted. It first measured 6.5 s (each loose-object
|
||||
> write cost ~1.5 s); the root cause was FatFS's lseek cluster-chain walk, and
|
||||
> the fast-seek fix cut it to **2.8 s cold / ~2 s steady-state**. The `esp_map.c`
|
||||
> window cache was **removed entirely** (0 hits across four instrumented runs —
|
||||
> `mwindow` absorbs any true repetition above `p_mmap`). The sub-second bar
|
||||
> failed, but ~2–2.8 s against 611 s/OOM for every alternative ships: a full
|
||||
> cold real-repo `:sync` lands at ~9–10 s. **Decision: wire the splice in** —
|
||||
> the [implementation plan](#the-fix--wiring-the-odepth-splice-into-the-firmware)
|
||||
> below (merged from the retired `notes/sync-commit-handoff.md`) is the working
|
||||
> checklist. Shrinking the repo is **not** an option
|
||||
> ([`../notes/git-sync-images-and-repo-size.md`](../notes/git-sync-images-and-repo-size.md):
|
||||
> the images are load-bearing for another app), which is exactly why the O(depth)
|
||||
> mechanism is the only lever left. This note records the cost model and the full
|
||||
@@ -479,10 +482,150 @@ work, ranked:
|
||||
window / 4 MB mapped limit). It fixed `odb.write` and the push read path; #2 just
|
||||
makes it well-behaved under memory pressure.
|
||||
|
||||
**Recommendation:** build #1 (O(depth) TreeBuilder walk) with #2 (cache
|
||||
evict-on-munmap) in the same pass. See
|
||||
[`../notes/sync-commit-handoff.md`](../notes/sync-commit-handoff.md) for the
|
||||
concrete next-session plan (bench design, firmware plumbing, exact call sites).
|
||||
**Recommendation:** build #1 (the O(depth) TreeBuilder walk) — #2 resolved
|
||||
itself by removal. The concrete plumbing plan (exact call sites, dirty-set
|
||||
threading, FD budget) is the
|
||||
[next section](#the-fix--wiring-the-odepth-splice-into-the-firmware).
|
||||
|
||||
## The fix — wiring the O(depth) splice into the firmware
|
||||
|
||||
> Merged from `docs/notes/sync-commit-handoff.md` (written 2026-07-12, retired
|
||||
> 2026-07-13 once the bench phase closed). The handoff's bench half is done —
|
||||
> the splice op lives in `git_bench` and the numbers above are its output. What
|
||||
> follows is the still-open firmware plumbing, updated to the run-5 final state.
|
||||
|
||||
### The splice walk
|
||||
|
||||
Rebuild only the edited file's ancestor subtree chain onto HEAD's tree. Never
|
||||
materialise the 1179-entry index; never `index.write()`; never `read_tree` the
|
||||
whole tree. Cost is O(depth × dirty_files), flat in repo size, tiny heap, and it
|
||||
carries every unchanged entry (all 260 images, the other 1176 files) forward
|
||||
untouched — which means **the device doesn't even need the images in its
|
||||
working tree.**
|
||||
|
||||
Sketch (git2 0.20 API — all present: `Repository::treebuilder(Option<&Tree>)`,
|
||||
`TreeBuilder::{insert,remove,write}`, `Tree::{get_name,get_path}`,
|
||||
`TreeEntry::{to_object,filemode}`):
|
||||
|
||||
```rust
|
||||
/// Return a new tree OID = `base` with `path` set to `new` (Some(blob_oid) to
|
||||
/// add/replace, None to delete). Reads ~depth subtree objects, writes ~depth trees.
|
||||
fn splice(repo: &Repository, base: &Tree, path: &[&str], new: Option<Oid>) -> Result<Oid> {
|
||||
let (head, rest) = path.split_first().unwrap();
|
||||
if rest.is_empty() {
|
||||
// leaf level: patch this tree directly
|
||||
let mut tb = repo.treebuilder(Some(base))?;
|
||||
match new {
|
||||
Some(oid) => tb.insert(head, oid, 0o100644)?, // FileMode::Blob
|
||||
None => { tb.remove(head).ok(); } // delete
|
||||
};
|
||||
return Ok(tb.write()?);
|
||||
}
|
||||
// descend: find (or synthesize) the subtree, recurse, re-insert its new OID
|
||||
let sub = base.get_name(head)
|
||||
.and_then(|e| e.to_object(repo).ok())
|
||||
.and_then(|o| o.peel_to_tree().ok());
|
||||
let empty; let sub_ref = match &sub { Some(t) => t, None => { empty = repo.treebuilder(None)?; /* ... */ unreachable!() } };
|
||||
let new_sub = splice(repo, sub_ref, rest, new)?;
|
||||
let mut tb = repo.treebuilder(Some(base))?;
|
||||
// if new_sub is the empty tree and this was a delete, remove the dir entry instead
|
||||
tb.insert(head, new_sub, 0o040000)?; // FileMode::Tree
|
||||
Ok(tb.write()?)
|
||||
}
|
||||
```
|
||||
|
||||
Then, for the dirty set, fold each change through `splice` (thread the running
|
||||
root tree), and `commit(Some("HEAD"), …, &final_tree, &[&parent])`. Edge cases
|
||||
to handle: new files where an intermediate dir doesn't exist yet (build subtree
|
||||
from `None`), deletes that empty a directory (remove the dir entry rather than
|
||||
insert an empty tree), and path splitting on `/` (paths are repo-relative
|
||||
POSIX). The benched reference is `git_bench`'s `splice stage→tree` op.
|
||||
|
||||
### `firmware/src/git_sync.rs`
|
||||
|
||||
- **Set the mwindow options at service start** (before the first
|
||||
`Repository::open`): `git2::opts::set_mwindow_size(256 * 1024)` +
|
||||
`set_mwindow_mapped_limit(4 * 1024 * 1024)`. Today only `git_bench.rs` sets
|
||||
them — the shipping service runs libgit2's 32-bit defaults (**32 MB window /
|
||||
256 MB mapped limit**, mwindow.c:16), so the first pack access on the 570 MB
|
||||
clone would try to `git__malloc` a 32 MB window and die on the 8 MB PSRAM
|
||||
heap before the walk even runs. Run 5 sharpened the stakes: the ~1.85 MB
|
||||
"resident" in the final bench **is** mwindow's live open-window set, so these
|
||||
opts are the only thing bounding it.
|
||||
- Rewrite `stage_and_commit` (currently ~L271–332) to the `splice`-walk above.
|
||||
Drop `add_all`/`update_all`/`index.write`/`index.write_tree`. Keep the
|
||||
`commit split —` timing log, the `tree unchanged → nothing to publish` check,
|
||||
and the signature/message code.
|
||||
- `PublishRequest` (~L79) is currently an **empty struct** — it must carry the
|
||||
dirty set: `{ changed: Vec<(String /*repo-rel path*/, ...)>, deleted: Vec<String> }`.
|
||||
The commit needs the blob content or a way to read it; simplest is to pass the
|
||||
paths and let the git thread `repo.blob_path(abs)` / read `/sd/repo/<path>`.
|
||||
- `reconcile_onto_origin` (~L377/L394) uses `repo.reset(Mixed)` — with an
|
||||
index-free commit there's no index to reset; switch to `ResetType::Soft` (move
|
||||
HEAD only) or drop the reset and just re-`splice` onto the new origin tip.
|
||||
- The macOS-cruft filter (`skip_macos_cruft`) is no longer needed — the walk only
|
||||
ever touches paths the editor explicitly hands it, so `._*`/`.DS_Store` can't
|
||||
sneak in. (Keep a note; don't silently lose the Spike-14 lesson.)
|
||||
- **Deliberate behavior change to record:** the walk commits *only* the
|
||||
editor's dirty set. Files changed on the card outside the editor (e.g. the
|
||||
card mounted on a Mac) were swept in by `add_all` before; they will now never
|
||||
be committed, and the working tree will show a permanent diff against HEAD if
|
||||
inspected on a desktop. Correct for the appliance (it's also what makes the
|
||||
cruft filter unnecessary), but it must be intentional, not accidental.
|
||||
|
||||
### Dirty-set source — `firmware/src/persistence.rs` + `main.rs`
|
||||
|
||||
- Writes funnel through `Storage::save_path` (~L316) and deletes through
|
||||
`Storage::delete_path` (~L352), both `&self`. Accumulate a dirty/deleted set
|
||||
(needs `RefCell` interior mutability, or move the set up to `main.rs`).
|
||||
- `Effect::Publish` handler in `main.rs` (~L222) builds the `PublishRequest` from
|
||||
that set and clears it on a successful `Pushed`/`UpToDate` outcome.
|
||||
- **FD budget: `main.rs` (~L413) mounts with `Storage::mount()` = 4 open
|
||||
files, and the git thread shares that mount.** libgit2 keeps the pack +
|
||||
`.idx` (+ commit-graph) descriptors open and opens loose objects on top —
|
||||
that's why `git_bench` needed `mount_for_git` (16). On the real repo the
|
||||
shipping `:sync` will fail with "no free file descriptors" long before any
|
||||
latency question. Either mount with the 16-file budget in `main.rs` (the
|
||||
editor's 2-FD peak coexists fine) or split the budgets some other way.
|
||||
|
||||
### `esp_map.c` — nothing left to do
|
||||
|
||||
The handoff's third work item (an evict-on-`p_munmap` cache fix) is superseded:
|
||||
run 5 removed the cache outright and `esp_map.c` is already the plain
|
||||
malloc-read/free-at-munmap emulation (see verdict item 2). One surviving
|
||||
operational note: editing `components/libgit2/*.c` won't rebuild via plain
|
||||
`cargo build` — first
|
||||
`rm -rf firmware/target/xtensa-esp32s3-espidf/release/.fingerprint/esp-idf-sys-*`
|
||||
(the `esp-idf-component-rebuild` lesson).
|
||||
|
||||
### How to bench / flash
|
||||
|
||||
`git_bench.rs` runs git ops on the 96 KB `GIT_STACK` thread (the main task stack
|
||||
overflows on these ops — that's why the real service has a dedicated thread). It's
|
||||
Rust-only, so a plain rebuild picks it up (no fingerprint dance unless you also
|
||||
touched `esp_map.c`).
|
||||
|
||||
```
|
||||
just flash-gitbench
|
||||
# = . ~/export-esp.sh && LIBGIT2_SRC=<repo>/firmware/components/libgit2/vendor \
|
||||
# LIBGIT2_NO_VENDOR=1 PKG_CONFIG_ALLOW_CROSS=1 \
|
||||
# PKG_CONFIG_LIBDIR=<repo>/firmware/pkgconfig \
|
||||
# cargo run --release --bin git_bench --features git
|
||||
```
|
||||
|
||||
Bench on the **real repo** clone (`/sd/repo` = full `jcalixte/notes`), not the
|
||||
toy — the toy pack understates everything by ~2 orders of magnitude.
|
||||
|
||||
### Still open (none block the plumbing)
|
||||
|
||||
- The residual ~360 ms/loose-write ≈ 8 unique small SD round-trips; next
|
||||
suspect is FAT **directory-op** cost in the freshen/refresh path. One
|
||||
instrumentation pass for later (log each `p_mmap` miss + bench dir ops in
|
||||
`sd_bench`).
|
||||
- Ref/reflog-update cost on the real repo — the bench's `commit(None)` writes
|
||||
no ref, so the shipping commit's last leg is unmeasured.
|
||||
- The push's ~6.5 s network floor
|
||||
([`../notes/sync-latency.md`](../notes/sync-latency.md)) — a separate curve.
|
||||
|
||||
## Adjacent lever: should the images be on the card at all?
|
||||
|
||||
|
||||
Reference in New Issue
Block a user