diff --git a/hardware/case/README.md b/hardware/case/README.md index 527c5d8..37b858c 100644 --- a/hardware/case/README.md +++ b/hardware/case/README.md @@ -81,9 +81,10 @@ serviceable. - The through-**aperture** is a hair larger than the active area and stays *inside* the glass-minus-lip envelope, so the lip covers only dead border. -- The recess opens into the cavity, and an **FPC bay** — an open notch in the - **left bezel** (the user's left as they face the screen) — lets the flex exit - and fold down to the DESPI-C579 breakout below. +- The recess opens into the cavity, and an **internal FPC clearance** on the + **left** (the user's left as they face the screen) — kept below the bezel lip + so it's invisible from outside — lets the flex fold back to the DESPI-C579 + breakout. Nothing breaks the external bezel. - Foam does three jobs: cushions the glass, takes up print tolerance (±0.2–0.5 mm), and removes any need for adhesive. Cut it from a plain EVA/ PORON sheet — no sticky backing. @@ -96,7 +97,7 @@ The glass is **trapped at both edges** between the front lip and the rear foam+bracket; the bracket is what stops it dropping *into* the cavity (`show="section"`): -![Midline section: glass clamped between the front lip and the rear foam + bracket; the FPC bay is the notch in the left bezel, standoffs on the cavity floor](renders/section.png) +![Midline section: glass clamped between the front lip and the rear foam + bracket; the internal FPC clearance is hidden below the left bezel, standoffs on the cavity floor](renders/section.png) ![The screwed bracket — four corner holes, window clears the active area](renders/bracket.png) diff --git a/hardware/case/renders/assembled.png b/hardware/case/renders/assembled.png index 78172b6..7ca7689 100644 Binary files a/hardware/case/renders/assembled.png and b/hardware/case/renders/assembled.png differ diff --git a/hardware/case/renders/body.png b/hardware/case/renders/body.png index 00e77f5..5767a27 100644 Binary files a/hardware/case/renders/body.png and b/hardware/case/renders/body.png differ diff --git a/hardware/case/renders/nameplate.png b/hardware/case/renders/nameplate.png index 268e00f..e567845 100644 Binary files a/hardware/case/renders/nameplate.png and b/hardware/case/renders/nameplate.png differ diff --git a/hardware/case/renders/print.png b/hardware/case/renders/print.png index af790a3..f960cf3 100644 Binary files a/hardware/case/renders/print.png and b/hardware/case/renders/print.png differ diff --git a/hardware/case/renders/section.png b/hardware/case/renders/section.png index 6c93ed9..f05e884 100644 Binary files a/hardware/case/renders/section.png and b/hardware/case/renders/section.png differ