diff --git a/hardware/case/README.md b/hardware/case/README.md
index 20fa3c5..688d4c9 100644
--- a/hardware/case/README.md
+++ b/hardware/case/README.md
@@ -19,11 +19,11 @@ back-top edge is a subtle roll that nods to one for free.
 
 ## Files
 
-| File | What |
-| --- | --- |
-| [`typoena-case.scad`](typoena-case.scad) | The parametric model. All dimensions live at the top. |
-| [`concept.html`](concept.html) | Dimensioned side/front/top drawing (open in a browser). |
-| `renders/` | PNG previews (regenerated by the commands below). |
+| File                                     | What                                                    |
+| ---------------------------------------- | ------------------------------------------------------- |
+| [`typoena-case.scad`](typoena-case.scad) | The parametric model. All dimensions live at the top.   |
+| [`concept.html`](concept.html)           | Dimensioned side/front/top drawing (open in a browser). |
+| `renders/`                               | PNG previews (regenerated by the commands below).       |
 
 ## Render / preview
 
@@ -82,7 +82,7 @@ serviceable.
 ```
 
 - The through-**aperture** is a hair larger than the active area and stays
-  *inside* the glass-minus-lip envelope, so the lip covers only dead border.
+  _inside_ the glass-minus-lip envelope, so the lip covers only dead border.
 - The recess opens into the cavity, and an **internal FPC clearance** on the
   **left** (the user's left as they face the screen) — kept below the bezel lip
   so it's invisible from outside — lets the flex fold back to the DESPI-C579
@@ -94,9 +94,9 @@ serviceable.
   cantilever clips. It works, but clips point-load the glass edge; the
   foam+bracket route is gentler and I'd default to it.
 
-The lip alone can't hold the glass — it only stops it falling *out* the front.
+The lip alone can't hold the glass — it only stops it falling _out_ the front.
 The glass is **trapped at both edges** between the front lip and the rear
-foam+bracket; the bracket is what stops it dropping *into* the cavity
+foam+bracket; the bracket is what stops it dropping _into_ the cavity
 (`show="section"`):
 
 ![Midline section: glass clamped between the front lip and the rear foam + bracket; the internal FPC clearance is hidden below the left bezel, standoffs on the cavity floor](renders/section.png)
@@ -182,9 +182,8 @@ curl -sL -o ~/Library/Fonts/CutiveMono-Regular.ttf \
 fc-cache -f    # so the OpenSCAD CLI picks either up
 ```
 
-To audition other faces: Google Fonts, filtered to monospace and previewing the
-name —
-<https://fonts.google.com/?preview.text=TYPOENA%0ATypoena%0Atypoena&categoryFilters=Appearance:%2FMonospace%2FMonospace>
+To audition other faces: [Google Fonts](https://fonts.google.com/?preview.text=TYPOENA%0ATypoena%0Atypoena&categoryFilters=Appearance:%2FMonospace%2FMonospace), filtered to monospace and previewing the
+name.
 
 ## Open questions / TODO